YAMAHA MT09 FZ09 2013-2020 Carbon Fiber Rear Hugger by Carbon2race is a direct replacement for the original part and therefore contributes mainly to the great appearance, weight saving on the motorcycle and a higher stiffness of the parts..

Fit models:

  • YAMAHA MT09 2013-2020;
  • YAMAHA FZ09 2013-2020;

Product Features:

  • High quality carbon fiber – available in Plain or Twill weave carbon fiber
  • UV protected using premium Ceramic coat (same as used on Ducati OEM carbon fiber parts) – available in Glossy or Matte finish
  • You can choose if you want Carbon2race sticker logo attached or not (it can also be removed afterwards if needed, as it is applied over coating)
  • Easy and quick mounting using bolts from original part
  • Much improved appearance compared to original part
  • Lighter than original part
  • 100% Handmade in Slovenia (EU)

*Pictured in Plain weave and Glossy finish.

Every component is constructed using a one-piece carbon sheet for a consistent weave pattern. Our production processes allow exceptional carbon/resin ratio, creating high product stiffness that also leads to extra strength.

14 reviews for YAMAHA MT09 FZ09 2013-2020 Carbon Fiber Rear Hugger

  1. Boris P. (verified owner)

    So much better then the original one! Looks awesome!

  2. Henrik (verified owner)

    One of the holes was a bit too narrow for the screw to go through but that was just a minor inconvenience

  3. Bjarke N. (verified owner)

    A true pleasure to order from these guys.

  4. Anonymous (verified owner)

    Cette pièce est parfaite et vient correctement se placer en substitution du pare-boue d’origine. Le rendu est super.

  5. Andrea P. (verified owner)

  6. Daniel Machin Acosta (verified owner)

    A hole for the rear brake hose clamp is missing, so you cannot put it in the carbon hugger. Brake hose now go loosen.

  7. Luke M. (verified owner)

    Holes a touch small and would have been great if there was an additional hole on the side where the breakline clip holder is, like the OEM hugger

  8. YOUNG SU CHAE (verified owner)

  9. Klemen Zidarn (verified owner)

  10. Marco C. (verified owner)

  11. Kristian K. (verified owner)

    is nice to seem to be good quality and nice finish

  12. Gary M. (verified owner)

    Awesome company, products and service highly recommend

  13. Vito Pesce (verified owner)

  14. Doka Péter (verified owner)

Only logged in customers who have purchased this product may leave a review.

100% Handmade in EU

Every Carbon2race carbon piece is expertly crafted with the utmost care and precision in the EU. We source only the best materials from top-notch European suppliers, such as the same prepreg carbon fiber used by Ferrari and Lamborghini, and the same clear coat used on Ducati OEM carbon parts. We never compromise when it comes to quality, so you can rest assured you're getting the best value for your money.

Once we receive your order, our team of highly skilled craftsmen will begin creating your new carbon part. First, they will cut the fabrics and lay them up in molds. Then, the part will be cured in an autoclave, which applies up to 6 bar of pressure to consolidate the part and reduce air voids, ensuring its strength and durability. Following the curing process, they will de-mould, trim, and prepare the part for coating in either a glossy or matte finish. Our expert painters will then apply multiple layers of coating to protect the part from scratches and UV rays for years to come. If the part is glossy, it will be polished, and then inspected to ensure it meets all of our quality standards. Finally, it will be carefully packed and sent to you!

RETURN POLICY

We want you to be completely satisfied with your purchase, which is why we offer free returns* within 30 days of receiving your order. If something is not right, please follow the instructions below to make a return.

RETURN PROCESS

1. Please contact us to initiate a return. Be sure to include your order number in the subject line.

2. Our support team will contact you with details for return. 

3. Simply re-package the item, attach the label, and drop the package off at your nearest location (or wait for collection from courier at your location).

4. You're done!

Please Note: Your refund will be credited back to the original method of payment, and will be issued 3-4 business days after receipt of return. Refunds do not include any shipping costs paid on your original order (if applicable). We require that the items you return are unused and remain in the same condition as when you received them. If we find the products are returned with wear and tear, crash damage or any signs of use, we reserve the right to refuse the refund and you may be required to pay an additional shipping charge to receive the goods back. This return policy applies to all EU Countries (and UK). For international returns, please get in touch with us to discuss possibilities.

WARRANTY

We offer a one-year standard warranty on all Carbon2race products, covering any manufacturer defects, such as fading and clear coat failure. However, damage due to installation error or natural elements is not covered. Should the item be deemed warrantable, the customer must ship it back to our warehouse. We highly recommend professional installation. If you have any further questions, please feel free to email us at info@carbon2race.com.

We are proud to offer our parts in four distinct material and finish combinations, allowing you to customize your carbon parts to your individual style. You even have the choice to add or omit our "Carbon2race" logo. Whether you want to proudly display the logo or keep your parts "clean," the choice is yours!

PLAIN-GLOSS

200g/m2 plain weave with glossy clear coat- universal combination that looks amazing on any bike.

PLAIN-MATTE

200g/m2 plain weave with matte coat- it's a match for Ducati OEM carbon parts. The most "discrete" option.

TWILL-GLOSS

245g/m2 twill weave with glossy clear coat- it's a match for BMW, Kawasaki and Yamaha OEM carbon parts. Very popular option, and you can't miss with this one.

TWILL-MATTE

245g/m2 twill weave with matte coat- it's a match for Aprilia and KTM OEM carbon parts. Very slick, and looks absolutely premium in real life.

YAMAHA MT09 FZ09 2013-2020 Carbon Fiber Rear Hugger

(14 customer reviews)

149.90VAT included

Delivery Info

YAMAHA MT09 FZ09 2013-2020 Carbon Fiber Rear Hugger by Carbon2race is a direct replacement for the original part and therefore contributes mainly to the great appearance, weight saving on the motorcycle and a higher stiffness of the parts..

Fit models:

  • YAMAHA MT09 2013-2020;
  • YAMAHA FZ09 2013-2020;

Product Features:

  • High quality carbon fiber – available in Plain or Twill weave carbon fiber
  • UV protected using premium Ceramic coat (same as used on Ducati OEM carbon fiber parts) – available in Glossy or Matte finish
  • You can choose if you want Carbon2race sticker logo attached or not (it can also be removed afterwards if needed, as it is applied over coating)
  • Easy and quick mounting using bolts from original part
  • Much improved appearance compared to original part
  • Lighter than original part
  • 100% Handmade in Slovenia (EU)

*Pictured in Plain weave and Glossy finish.

Every component is constructed using a one-piece carbon sheet for a consistent weave pattern. Our production processes allow exceptional carbon/resin ratio, creating high product stiffness that also leads to extra strength.

14 reviews for YAMAHA MT09 FZ09 2013-2020 Carbon Fiber Rear Hugger

  1. Boris P. (verified owner)

    So much better then the original one! Looks awesome!

  2. Henrik (verified owner)

    One of the holes was a bit too narrow for the screw to go through but that was just a minor inconvenience

  3. Bjarke N. (verified owner)

    A true pleasure to order from these guys.

  4. Anonymous (verified owner)

    Cette pièce est parfaite et vient correctement se placer en substitution du pare-boue d’origine. Le rendu est super.

  5. Andrea P. (verified owner)

  6. Daniel Machin Acosta (verified owner)

    A hole for the rear brake hose clamp is missing, so you cannot put it in the carbon hugger. Brake hose now go loosen.

  7. Luke M. (verified owner)

    Holes a touch small and would have been great if there was an additional hole on the side where the breakline clip holder is, like the OEM hugger

  8. YOUNG SU CHAE (verified owner)

  9. Klemen Zidarn (verified owner)

  10. Marco C. (verified owner)

  11. Kristian K. (verified owner)

    is nice to seem to be good quality and nice finish

  12. Gary M. (verified owner)

    Awesome company, products and service highly recommend

  13. Vito Pesce (verified owner)

  14. Doka Péter (verified owner)

Only logged in customers who have purchased this product may leave a review.

100% Handmade in EU

Every Carbon2race carbon piece is expertly crafted with the utmost care and precision in the EU. We source only the best materials from top-notch European suppliers, such as the same prepreg carbon fiber used by Ferrari and Lamborghini, and the same clear coat used on Ducati OEM carbon parts. We never compromise when it comes to quality, so you can rest assured you're getting the best value for your money.

Once we receive your order, our team of highly skilled craftsmen will begin creating your new carbon part. First, they will cut the fabrics and lay them up in molds. Then, the part will be cured in an autoclave, which applies up to 6 bar of pressure to consolidate the part and reduce air voids, ensuring its strength and durability. Following the curing process, they will de-mould, trim, and prepare the part for coating in either a glossy or matte finish. Our expert painters will then apply multiple layers of coating to protect the part from scratches and UV rays for years to come. If the part is glossy, it will be polished, and then inspected to ensure it meets all of our quality standards. Finally, it will be carefully packed and sent to you!

RETURN POLICY

We want you to be completely satisfied with your purchase, which is why we offer free returns* within 30 days of receiving your order. If something is not right, please follow the instructions below to make a return.

RETURN PROCESS

1. Please contact us to initiate a return. Be sure to include your order number in the subject line.

2. Our support team will contact you with details for return. 

3. Simply re-package the item, attach the label, and drop the package off at your nearest location (or wait for collection from courier at your location).

4. You're done!

Please Note: Your refund will be credited back to the original method of payment, and will be issued 3-4 business days after receipt of return. Refunds do not include any shipping costs paid on your original order (if applicable). We require that the items you return are unused and remain in the same condition as when you received them. If we find the products are returned with wear and tear, crash damage or any signs of use, we reserve the right to refuse the refund and you may be required to pay an additional shipping charge to receive the goods back. This return policy applies to all EU Countries (and UK). For international returns, please get in touch with us to discuss possibilities.

WARRANTY

We offer a one-year standard warranty on all Carbon2race products, covering any manufacturer defects, such as fading and clear coat failure. However, damage due to installation error or natural elements is not covered. Should the item be deemed warrantable, the customer must ship it back to our warehouse. We highly recommend professional installation. If you have any further questions, please feel free to email us at info@carbon2race.com.

We are proud to offer our parts in four distinct material and finish combinations, allowing you to customize your carbon parts to your individual style. You even have the choice to add or omit our "Carbon2race" logo. Whether you want to proudly display the logo or keep your parts "clean," the choice is yours!

PLAIN-GLOSS

200g/m2 plain weave with glossy clear coat- universal combination that looks amazing on any bike.

PLAIN-MATTE

200g/m2 plain weave with matte coat- it's a match for Ducati OEM carbon parts. The most "discrete" option.

TWILL-GLOSS

245g/m2 twill weave with glossy clear coat- it's a match for BMW, Kawasaki and Yamaha OEM carbon parts. Very popular option, and you can't miss with this one.

TWILL-MATTE

245g/m2 twill weave with matte coat- it's a match for Aprilia and KTM OEM carbon parts. Very slick, and looks absolutely premium in real life.

[contact-form-7 id="59284"]