APRILIA RSV4 2009-2020 Carbon Fiber Rear Hugger by Carbon2race is a direct replacement for the original part and therefore contributes mainly to the much greater appearance of your bike, weight saving and a higher stiffness of the parts.

Fit models:

  • Aprilia RSV4 R/Factory 2009-2015;
  • Aprilia RSV4 2015-2020 RR/RF;

 

Product Features:

  • High quality carbon fiber – available in Plain or Twill weave carbon fiber
  • UV protected using premium Ceramic coat (same as used on Ducati OEM carbon fiber parts) – available in Glossy or Matte finish
  • You can choose if you want Carbon2race sticker logo attached or not (it can also be removed afterwards if needed, as it is applied over coating)
  • Easy and quick mounting using bolts from original part
  • Much improved appearance compared to original part
  • Lighter than original part
  • 100% Handmade in Slovenia (EU)

*Pictured in Plain weave and Glossy finish.

Every component is constructed using a one-piece carbon sheet for a consistent weave pattern. Our production processes allow exceptional carbon/resin ratio, creating high product stiffness that also leads to extra strength.

15 reviews for APRILIA RSV4 2009-2020 Carbon Fiber Rear Hugger

  1. yaron a. (verified owner)

  2. Micheal Harvey (verified owner)

    Excellent service and quick delivery

  3. James Sorokin (verified owner)

    beautifuly made

  4. stijn (verified owner)

  5. Andrew Peinke (verified owner)

    Perfect

  6. Christian (verified owner)

    Schnelle Lieferung,super Qualität.

  7. coen mul (verified owner)

  8. Niksa K. (verified owner)

    Quality is very good but I paid in total 146,97 Euros

  9. Clayton B. (verified owner)

  10. Richard (verified owner)

    Fitment isn’t great. Using the stock hardware, the fender will tighten down to touch the tire. You will have to buy spacers/grommets/washers to make the fender work. In addition, a section/mold of the right side of the fender extends outside the swingarm, which makes it look cheap. The Carbon itself is nice, which is why this review is not just a 1 star.

  11. Johnathan Butcher (verified owner)

  12. Roland Bruyns (verified owner)

  13. Anonymous (verified owner)

  14. Neal Parker (verified owner)

  15. Anonymous (verified owner)

Only logged in customers who have purchased this product may leave a review.

We are proud to offer our parts in four distinct material and finish combinations, allowing you to customize your carbon parts to your individual style. You even have the choice to add or omit our "Carbon2race" logo. Whether you want to proudly display the logo or keep your parts "clean," the choice is yours!

PLAIN-GLOSS

200g/m2 plain weave with glossy clear coat- universal combination that looks amazing on any bike.

PLAIN-MATTE

200g/m2 plain weave with matte coat- it's a match for Ducati OEM carbon parts. The most "discrete" option.

TWILL-GLOSS

245g/m2 twill weave with glossy clear coat- it's a match for BMW, Kawasaki and Yamaha OEM carbon parts. Very popular option, and you can't miss with this one.

TWILL-MATTE

245g/m2 twill weave with matte coat- it's a match for Aprilia and KTM OEM carbon parts. Very slick, and looks absolutely premium in real life.

100% Handmade in EU

Every Carbon2race carbon piece is expertly crafted with the utmost care and precision in the EU. We source only the best materials from top-notch European suppliers, such as the same prepreg carbon fiber used by Ferrari and Lamborghini, and the same clear coat used on Ducati OEM carbon parts. We never compromise when it comes to quality, so you can rest assured you're getting the best value for your money.

Once we receive your order, our team of highly skilled craftsmen will begin creating your new carbon part. First, they will cut the fabrics and lay them up in molds. Then, the part will be cured in an autoclave, which applies up to 6 bar of pressure to consolidate the part and reduce air voids, ensuring its strength and durability. Following the curing process, they will de-mould, trim, and prepare the part for coating in either a glossy or matte finish. Our expert painters will then apply multiple layers of coating to protect the part from scratches and UV rays for years to come. If the part is glossy, it will be polished, and then inspected to ensure it meets all of our quality standards. Finally, it will be carefully packed and sent to you!

RETURN POLICY

We want you to be completely satisfied with your purchase, which is why we offer free returns* within 30 days of receiving your order. If something is not right, please follow the instructions below to make a return.

RETURN PROCESS

1. Please contact us to initiate a return. Be sure to include your order number in the subject line.

2. Our support team will contact you with details for return. 

3. Simply re-package the item, attach the label, and drop the package off at your nearest location (or wait for collection from courier at your location).

4. You're done!

Please Note: Your refund will be credited back to the original method of payment, and will be issued 3-4 business days after receipt of return. Refunds do not include any shipping costs paid on your original order (if applicable). We require that the items you return are unused and remain in the same condition as when you received them. If we find the products are returned with wear and tear, crash damage or any signs of use, we reserve the right to refuse the refund and you may be required to pay an additional shipping charge to receive the goods back. This return policy applies to all EU Countries (and UK). For international returns, please get in touch with us to discuss possibilities.

WARRANTY

We offer a one-year standard warranty on all Carbon2race products, covering any manufacturer defects, such as fading and clear coat failure. However, damage due to installation error or natural elements is not covered. Should the item be deemed warrantable, the customer must ship it back to our warehouse. We highly recommend professional installation. If you have any further questions, please feel free to email us at info@carbon2race.com.

APRILIA RSV4 2009-2020 Carbon Fiber Rear Hugger

(15 customer reviews)

170.00$

  • *Material

    *Finish

    Reset options
Delivery Info

APRILIA RSV4 2009-2020 Carbon Fiber Rear Hugger by Carbon2race is a direct replacement for the original part and therefore contributes mainly to the much greater appearance of your bike, weight saving and a higher stiffness of the parts.

Fit models:

  • Aprilia RSV4 R/Factory 2009-2015;
  • Aprilia RSV4 2015-2020 RR/RF;

 

Product Features:

  • High quality carbon fiber – available in Plain or Twill weave carbon fiber
  • UV protected using premium Ceramic coat (same as used on Ducati OEM carbon fiber parts) – available in Glossy or Matte finish
  • You can choose if you want Carbon2race sticker logo attached or not (it can also be removed afterwards if needed, as it is applied over coating)
  • Easy and quick mounting using bolts from original part
  • Much improved appearance compared to original part
  • Lighter than original part
  • 100% Handmade in Slovenia (EU)

*Pictured in Plain weave and Glossy finish.

Every component is constructed using a one-piece carbon sheet for a consistent weave pattern. Our production processes allow exceptional carbon/resin ratio, creating high product stiffness that also leads to extra strength.

15 reviews for APRILIA RSV4 2009-2020 Carbon Fiber Rear Hugger

  1. yaron a. (verified owner)

  2. Micheal Harvey (verified owner)

    Excellent service and quick delivery

  3. James Sorokin (verified owner)

    beautifuly made

  4. stijn (verified owner)

  5. Andrew Peinke (verified owner)

    Perfect

  6. Christian (verified owner)

    Schnelle Lieferung,super Qualität.

  7. coen mul (verified owner)

  8. Niksa K. (verified owner)

    Quality is very good but I paid in total 146,97 Euros

  9. Clayton B. (verified owner)

  10. Richard (verified owner)

    Fitment isn’t great. Using the stock hardware, the fender will tighten down to touch the tire. You will have to buy spacers/grommets/washers to make the fender work. In addition, a section/mold of the right side of the fender extends outside the swingarm, which makes it look cheap. The Carbon itself is nice, which is why this review is not just a 1 star.

  11. Johnathan Butcher (verified owner)

  12. Roland Bruyns (verified owner)

  13. Anonymous (verified owner)

  14. Neal Parker (verified owner)

  15. Anonymous (verified owner)

Only logged in customers who have purchased this product may leave a review.

100% Handmade in EU

Every Carbon2race carbon piece is expertly crafted with the utmost care and precision in the EU. We source only the best materials from top-notch European suppliers, such as the same prepreg carbon fiber used by Ferrari and Lamborghini, and the same clear coat used on Ducati OEM carbon parts. We never compromise when it comes to quality, so you can rest assured you're getting the best value for your money.

Once we receive your order, our team of highly skilled craftsmen will begin creating your new carbon part. First, they will cut the fabrics and lay them up in molds. Then, the part will be cured in an autoclave, which applies up to 6 bar of pressure to consolidate the part and reduce air voids, ensuring its strength and durability. Following the curing process, they will de-mould, trim, and prepare the part for coating in either a glossy or matte finish. Our expert painters will then apply multiple layers of coating to protect the part from scratches and UV rays for years to come. If the part is glossy, it will be polished, and then inspected to ensure it meets all of our quality standards. Finally, it will be carefully packed and sent to you!

RETURN POLICY

We want you to be completely satisfied with your purchase, which is why we offer free returns* within 30 days of receiving your order. If something is not right, please follow the instructions below to make a return.

RETURN PROCESS

1. Please contact us to initiate a return. Be sure to include your order number in the subject line.

2. Our support team will contact you with details for return. 

3. Simply re-package the item, attach the label, and drop the package off at your nearest location (or wait for collection from courier at your location).

4. You're done!

Please Note: Your refund will be credited back to the original method of payment, and will be issued 3-4 business days after receipt of return. Refunds do not include any shipping costs paid on your original order (if applicable). We require that the items you return are unused and remain in the same condition as when you received them. If we find the products are returned with wear and tear, crash damage or any signs of use, we reserve the right to refuse the refund and you may be required to pay an additional shipping charge to receive the goods back. This return policy applies to all EU Countries (and UK). For international returns, please get in touch with us to discuss possibilities.

WARRANTY

We offer a one-year standard warranty on all Carbon2race products, covering any manufacturer defects, such as fading and clear coat failure. However, damage due to installation error or natural elements is not covered. Should the item be deemed warrantable, the customer must ship it back to our warehouse. We highly recommend professional installation. If you have any further questions, please feel free to email us at info@carbon2race.com.

We are proud to offer our parts in four distinct material and finish combinations, allowing you to customize your carbon parts to your individual style. You even have the choice to add or omit our "Carbon2race" logo. Whether you want to proudly display the logo or keep your parts "clean," the choice is yours!

PLAIN-GLOSS

200g/m2 plain weave with glossy clear coat- universal combination that looks amazing on any bike.

PLAIN-MATTE

200g/m2 plain weave with matte coat- it's a match for Ducati OEM carbon parts. The most "discrete" option.

TWILL-GLOSS

245g/m2 twill weave with glossy clear coat- it's a match for BMW, Kawasaki and Yamaha OEM carbon parts. Very popular option, and you can't miss with this one.

TWILL-MATTE

245g/m2 twill weave with matte coat- it's a match for Aprilia and KTM OEM carbon parts. Very slick, and looks absolutely premium in real life.

[contact-form-7 id="59284"]